Published, Flat, and the Same for Everybody
Nothing here is negotiable and nothing here changes depending on what you end up buying. We charge for time on the bench, and the recommendation at the end costs the same whether it is a full set or a bending bar.
Fitting Sessions
Full-Bag Gapping Audit
$165- Every club measured for loft, lie, length and swingweight
- Carry ladder plotted end to end on the monitor
- Written distance map and a prioritised change list
- Includes any bending required on the day
Single-Club Session
$95- Wedges, irons, driver, fairway, hybrid or putter
- Gauge-table measurement of what you bring
- Controlled comparison on the monitor or turf strip
- Written specification sheet
Wedge and Scoring-Club Session
$110- All wedges plus the pitching wedge from your set
- Live turf-strip contact reading
- Bounce and grind trial from three lie types
- Loft spacing plan, bending included
Junior Sizing
$45- Height and posture measurement
- Cut-down and re-weighting of an existing set
- Re-check invited every six months at no charge
Spring Carry Calibration
$60- Cold-weather carry numbers for your full set
- Comparison against your summer figures if we have them
- Updated yardage card
Bench Work
| Service | Price | Included |
|---|---|---|
| Loft and lie check | $5 | Recorded on a sheet you keep |
| Bending | $8 | Re-measured after |
| Re-grip | $7 plus grip | Old grip removed and disposed |
| Shorten or extend | $18 | Swingweight corrected |
| Re-shaft | $35 plus shaft | Trimmed to spec, swingweight matched |
| Full-set frequency match | $120 | Whole set, logged |
| Ferrule replacement | $9 | Turned and polished |
Cast heads and bending. Some cast irons cannot be bent safely. We check the head before putting it in the machine and we will decline the job rather than gamble with your club. No charge if we decline.
Builds
Component cost plus assembly. Assembly is $35 a club for woods and $28 a club for irons and wedges, and that includes trimming to the manufacturer's instruction, swingweight matching, and a written build log. There is no separate fitting fee added on top — the session you already paid for is credited against it.
We do not mark components up beyond the standard trade margin and we will show you the invoice line if you ask. Nobody ever asks, but the offer is real.